A splice plate should be ordered as part of a defined connection set. Matching overall dimensions do not prove that two plates belong together or that their holes align with the intended members. Identify the set, orientation and hole pattern before fabrication begins.
Show the joint as well as the loose plate
Provide the component drawing and an assembly view locating it at the joint. Identify the member ends, plate faces and any top or outside reference. Where plates sit on opposite sides, state whether they are identical, mirrored or individually detailed. The connection designer determines the material, geometry, fasteners and structural requirements; the supply drawing must carry those decisions into production.
Decide whether pieces are interchangeable
Some sets are intended to fit any matching member made to the same drawing. Others are supplied as specifically matched pieces. State which approach applies and whether a trial fit or template check is required. Match marks should be readable at assembly but placed in an approved location. Avoid a marking system that only the packing team understands.
Investigate misalignment before changing holes
When a trial fit fails, first compare the drawing revisions, viewing direction, part marks and measurement datums. A rotated or reversed plate can resemble a machining error. Record the actual discrepancy and refer any proposed hole alteration to the responsible approval route. Enlarging a hole in the workshop is not simply a packing correction.
Pack the connection set coherently
Give each set a contents list and make any separately supplied fasteners or accessories explicit. Keep the set identity on both the packaging and the component register. For a split shipment, flag incomplete sets so the installation team can avoid planning a joint around missing pieces.
A practical splice-set schedule
| Item | Information to define |
|---|---|
| Joint reference | Location and mating member marks |
| Plate identity | Pair, hand and viewing face |
| Fit requirement | Interchangeable or matched set |
| Dispatch check | Complete contents and open items |
Before you release the next stage
- Include an assembly view.
- Define interchangeability before making match marks.
- Resolve alterations through the approved drawing process.
Continue with Weathering Steel Gusset Plates: Review the Hole Layout Before Cutting, or send your project requirements for a scope review.
